Digital Signal ControllersのトピックGTL2010 voltage level translator query https://community.nxp.com/t5/Digital-Signal-Controllers/GTL2010-voltage-level-translator-query/m-p/654312#M973 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>I want to use GTL2010 in my design where i have the requirement below:</P><P>&nbsp;Voltage translation : 1.8V to 2.8V</P><P>Direction : Bidirectional</P><P>Sensing feature : Auto sensing</P><P></P><P>According to the datasheet the voltage on SREF pin should be DREF - 1.5V but in my case i am giving 1.8V on SREF and 2.8V on DREF and GREF. Can any body please confirm if i can use this and it will not affect my translation performance.</P><P></P><P>Thanks,</P><P>Khemraj</P></BODY></HTML> Tue, 02 May 2017 08:51:52 GMT khemrajsuthar 2017-05-02T08:51:52Z GTL2010 voltage level translator query https://community.nxp.com/t5/Digital-Signal-Controllers/GTL2010-voltage-level-translator-query/m-p/654312#M973 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>I want to use GTL2010 in my design where i have the requirement below:</P><P>&nbsp;Voltage translation : 1.8V to 2.8V</P><P>Direction : Bidirectional</P><P>Sensing feature : Auto sensing</P><P></P><P>According to the datasheet the voltage on SREF pin should be DREF - 1.5V but in my case i am giving 1.8V on SREF and 2.8V on DREF and GREF. Can any body please confirm if i can use this and it will not affect my translation performance.</P><P></P><P>Thanks,</P><P>Khemraj</P></BODY></HTML> Tue, 02 May 2017 08:51:52 GMT https://community.nxp.com/t5/Digital-Signal-Controllers/GTL2010-voltage-level-translator-query/m-p/654312#M973 khemrajsuthar 2017-05-02T08:51:52Z