How to do In-system programming by UART in MPC5645S

vikaskumarsingh — Mon, 13 Jun 2016 18:36:34 GMT

Hi,

I am setting looking for the solution for my production, in which i have to flash code into MPC5645S on mounted board.

I want to use UART for this.

Please tell me if there is a way to do this.

regards

vikas

Re: How to do In-system programming by UART in MPC5645S

TICS_Fiona — Mon, 20 Jun 2016 06:12:11 GMT

Hello Vikas

Currently we do not have any official bootloader for this part. I can provide only a bootloader that I got from my colleagues. It could be a nice start point for you and you can reuse some code. It was written for MPC560xB/P/S.

And for MPC56xx issue, please post the question on this forum:

https://community.nxp.com/community/s32/mpc5xxx/content

Best Regards

Fiona Kuang

TIC - Technical Information Center

-----------------------------------------------------------------------------------------------------------------------

Note: If this post answers your question, please click the Mark Correct button. Thank you!

-----------------------------------------------------------------------------------------------------------------------

topic Re: How to do In-system programming by UART in MPC5645S in Digital Signal Controllers

How to do In-system programming by UART in MPC5645S

Re: How to do In-system programming by UART in MPC5645S