Digital Signal ControllersのトピックRe: Hi

Hi

ramakrishnadutt — Wed, 20 Jan 2016 04:41:40 GMT

I am using almost all peripherals in my project like PWM, ADC, DAC, TIMERS ETC.,,

I am using M656F82748 DSC

I am having two projects: 1. Application Project 2. Bootloader Project

Now I am trying to link app project with bootloader project.

I am new to this linker file.

please help me how to write/modify the linker file of application project, so that it will link correctly to the bootloader project.

TICS_Fiona — Fri, 22 Jan 2016 08:54:35 GMT

For how write the link command file, please refer to <Chapter 7 ELF Linker> in the DSC build tools reference, which locates under CW10.6 folder:

C:\Freescale\CW MCU v10.6.4\MCU\Help\PDF\MCU_DSC_Compiler.pdf

For how to modify the link command file in application project so that it can be supported by bootloader, please refer to section 5 in this AN:

I attached a link command file in my application project which supports to be loaded by bootloader for your reference.

Best Regards

Fiona Kuang

Technical Information & Commercial Support

-----------------------------------------------------------------------------------------------------------------------

Note: If this post answers your question, please click the Correct Answer button. Thank you!

-----------------------------------------------------------------------------------------------------------------------

ramakrishnadutt — Fri, 22 Jan 2016 09:11:01 GMT

Ok thanks for your answer,

I understood how to write the sections part in .cmd file.

Can u please tell me how to start with the memory part.