Digital Signal ControllersのトピックRe: codewarrier

codewarrier

Ujwala_kontham — Tue, 23 Jan 2024 04:56:15 GMT

while Iam trying to debug in CodeWarrior IDE using Multilink LC debug probe, getting the below error

please get me solution to resolve this.

Re: codewarrier

xiangjun_rong — Wed, 24 Jan 2024 06:10:47 GMT

Hi,

Do you use CodeWarrior for MCU ver11.x tools and Multilink Universal device? what is the part number you are using?

Pay attention to the pin 1 of the 14 pins JTAG connector, the red line of flat cable is cable 1.

XiangJun Rong

Re: codewarrier

Ujwala_kontham — Wed, 24 Jan 2024 06:24:54 GMT

Yes, Iam CodeWarrior for MCU ver11.x tools and am using Multilink Universal REV E (PEM9D3DA6) debugger and MC56F82746 uc and did correct connection as mentioned

Re: codewarrier

xiangjun_rong — Wed, 24 Jan 2024 09:10:04 GMT

Hi,

if you insert USB port, can you see the USB icon on the PC device manager?

I have tried to connect the multilink Universal with MC56F83000-EVK, no problem.

This is the device manager of PC

XiangJun Rong

Re: codewarrier

xiangjun_rong — Wed, 24 Jan 2024 09:16:14 GMT

Hi,

On the Multilink Universal device, you have to connect the 14 pin PORT A JTAG/ONCE connector.

XiangJun Rong