topic Re: If TDA8954J supply ok, clock signal ok? in Digital Signal Controllers

If TDA8954J supply ok, clock signal ok?

zw_wuxv — Wed, 10 Apr 2019 04:04:06 GMT

Debug the module of TDA8954J, no clock signal(internal clock) , no output.

+/-41VDC supply.

guoweisun — Fri, 12 Apr 2019 02:47:09 GMT

Hi,

Please update your schematic with attached application note if any difference!

By the way this device had already EOL no recommend for new design or project.

zw_wuxv — Mon, 25 Nov 2019 08:56:52 GMT

Hi G.w. Sun:

The trouble is still about the TDA8954J, Boss had choosen the IC.So we must finish the project.

There are 4 questions：

1）the led2 flickers when it has a 4OHM load（no signal input）；

2）when output has a load(4ohm),the output wave is not so clear. the filter's parameters need to change?

3)What's your suggestions about the GND layout?

4)the crosstalk is big.

Can we contact with email?