CodeWarrior for StarCoreのトピックRe: Debug Memory View - Export/Inport

Debug Memory View - Export/Inport

ITCO00 — Mon, 01 Nov 2010 16:10:39 GMT

Hello,

I'm using CW 10.1.3 for SmartDSP with SDOS. In the debug Memory View I do the following:

1. I export (dump) 2KB of memory data from DDR1 location to a raw binary file. This operation is OK.

2. Then, I overwrite the first few memory locations with 0xFF,

3. Finally, I try to import the file I previously exported to the beginning of the memory location.

The Import operation does not work. If I reduce the data size to 1KB, it works OK.

In any case I've checked the exported file, and its content was correct.

What might be the problem?

Thanks.

Re: Debug Memory View - Export/Inport

Irene — Tue, 02 Nov 2010 04:17:28 GMT

Have you tried to import/export memory using Target Task option?

Re: Debug Memory View - Export/Inport

ITCO00 — Tue, 02 Nov 2010 14:04:22 GMT

Hi,

Thanks, I wasn't aware of this option. I've tried to create Target Task for Fill, Export and Import Memory, using hex data and physical memory, and it works fine.

thank you.