topic Re: changing memory in CodeWarrior for MCU

changing memory

martinlockner — Tue, 24 Sep 2013 17:09:40 GMT

I need to change the memory model from small to banked on a HCS08 project. I have been using processor expert for the project and was able to make the change on the cpu and changed the model in the linker

but I am still getting incompatible model messages for some of the previously loaded libraries etc. Is there a step by step procedure or checklist for the change.

Re: changing memory

ZhangJennie — Wed, 25 Sep 2013 01:44:04 GMT

To change processor expert project from small model to bank, we need to modify three places:

in CPU properties, set memory model to Banked:

2. in compiler setting, set Memory model to banked:

3. in project management window. change included memory from ansiis.lib to ansibim.lib:

After above three steps, the pe project will change from small memory model to banked.

Hope this helps!

Re: changing memory

martinlockner — Wed, 25 Sep 2013 11:12:53 GMT

Jennie,

Thanks for the reply, I was able to get it changed over.

Regards,

Marty Lockner