[Discovery Options] page in project properties C/C++ Problem

georglerm — Tue, 25 Jun 2013 08:21:30 GMT

I created a 'bareboard' C++ project for the FRDM-KL25Z board.

I built the project with no errors, but when I start the debugger i get the '[Discovery Options] page in project properties C/C++ Problem' warning, and the process stops and prompts to continue with error or stop.

I had a look at the Discovery Options in the properties page, but this is a bit new to me, so not sure how to resolve this. When I ignore the error and continue to debugging it starts up everything and loads the code to the board and runs with no problem.

I have included a zip file with the project with this post. No modifications or any changes were made to the file or settings.

Any help/direction will be most appreciated.

Georg

Original Attachment has been moved to: testcpp1.zip

Re: [Discovery Options] page in project properties C/C++ Problem

TICS_Fiona — Tue, 25 Jun 2013 09:39:24 GMT

What's the CodeWarrior version you are using? 1)Start the IDE and click on Help | About CodeWarrior Development Studio. 2)Provide us the info displayed.

Re: [Discovery Options] page in project properties C/C++ Problem

georglerm — Tue, 25 Jun 2013 16:12:22 GMT

Apologies, should have included that.

Georg

CodeWarrior for MCUのトピック[Discovery Options] page in project properties C/C++ Problem

[Discovery Options] page in project properties C/C++ Problem

Re: [Discovery Options] page in project properties C/C++ Problem

Re: [Discovery Options] page in project properties C/C++ Problem