topic SP debug info incorrect in CodeWarrior for MCU

SP debug info incorrect

Seitec — Sat, 17 Jan 2009 18:42:23 GMT

Hello I have this code:

int n = 0;
void interrupt 38 receive_can(void){

unsigned char count;

Rx_Table[n].DLC=(CAN0RXDLR & 0x0F); /*prijata delka*/

for(count = 0; count < Rx_Table[n].DLC; count++){
Rx_Table[n].Data[count] = *(&CAN0RXDSR0 + count); /*kopirovani dat*/
}

CAN0RFLG = 0x01; /*nastaveni RXF dalsi zprava muze byt prijata*/
n++;
}

/******************************************************/
but if I would like debug there is warming SP debug info incorrect...
But if I arrange code (where int n = 0; is inside the function):
/*****************************************************/
void interrupt 38 receive_can(void){

unsigned char count;
int n = 0;

Rx_Table[n].DLC=(CAN0RXDLR & 0x0F); /*prijata delka*/

for(count = 0; count < Rx_Table[n].DLC; count++){
Rx_Table[n].Data[count] = *(&CAN0RXDSR0 + count); /*kopirovani dat*/
}

CAN0RFLG = 0x01; /*nastaveni RXF dalsi zprava muze byt prijata*/
n++;
}

It work properly without warmings but I need "n" as global. Is it mistake if I have "n" as global? Can I Switching off this optimization? Or I have mistake in code?

Thank you very much.

Re: SP debug info incorrect

CompilerGuru — Sun, 18 Jan 2009 08:54:10 GMT

To switch off the optimization, use -onf.

Daniel

Re: SP debug info incorrect

Seitec — Sun, 18 Jan 2009 16:57:55 GMT

Thank you. where I can write this -onf please?

Re: SP debug info incorrect

CompilerGuru — Tue, 20 Jan 2009 00:57:23 GMT

In the "Command line arguments" field in the "Compiler for HC??" preferences of the project Settings.

Daniel

Re: SP debug info incorrect

Lundin — Tue, 20 Jan 2009 20:58:38 GMT

I'm sure you know that "n" must be volatile if it is global. Otherwise you are introducing subtle but critical bugs in your program.

Re: SP debug info incorrect

Seitec — Thu, 29 Jan 2009 00:37:07 GMT

yes sorry, i forgot on it Thank you very much.