topic Re: C++ code in my project in CodeWarrior for MCU https://community.nxp.com/t5/CodeWarrior-for-MCU/C-code-in-my-project/m-p/215637#M8474 <HTML><HEAD></HEAD><BODY><P>This basically means that you need the payed edition of the tools to use C++. Since you are evaluating, you might want to know that the C++ support has some known limitations. You can check this section from the <A href="http://cache.freescale.com/files/soft_dev_tools/doc/ref_manual/MCU_HCS08_Compiler.pdf?fsrch=1&amp;sr=3" rel="nofollow" target="_self">compiler manual</A>: "Known C++ Issues in the HC(S)08 Compilers".</P></BODY></HTML> Mon, 12 Mar 2012 23:35:58 GMT NavidadRedivivu 2012-03-12T23:35:58Z C++ code in my project https://community.nxp.com/t5/CodeWarrior-for-MCU/C-code-in-my-project/m-p/215636#M8473 <HTML><HEAD></HEAD><BODY><P>Hi</P><P>&nbsp;</P><P>I'm evaluating the code warrior development environment - so a new user to this system. I have acquired a DEMO9S08AW60 board and an LCD display which I am looking to use in a new product development.</P><P>&nbsp;</P><P>I would like to try writing some C++ code, but when I try to use the processor expert option in the project wizard I get a message that additional tools are required....</P><P>&nbsp;</P><P>&nbsp;</P><P>&nbsp;</P><P>..."C++ is only available with the Professional and the standard edition when the enhanced compiler option is installed...."</P><P>&nbsp;</P><P>Can any one offer assistance with this message...?</P><P>&nbsp;</P><P>Where do you get these tools from and how to install them...?</P><P>&nbsp;</P><P>Many thanks in advance.</P><P>&nbsp;</P><P>MW</P></BODY></HTML> Mon, 12 Mar 2012 23:15:13 GMT https://community.nxp.com/t5/CodeWarrior-for-MCU/C-code-in-my-project/m-p/215636#M8473 MWMinor 2012-03-12T23:15:13Z Re: C++ code in my project https://community.nxp.com/t5/CodeWarrior-for-MCU/C-code-in-my-project/m-p/215637#M8474 <HTML><HEAD></HEAD><BODY><P>This basically means that you need the payed edition of the tools to use C++. Since you are evaluating, you might want to know that the C++ support has some known limitations. You can check this section from the <A href="http://cache.freescale.com/files/soft_dev_tools/doc/ref_manual/MCU_HCS08_Compiler.pdf?fsrch=1&amp;sr=3" rel="nofollow" target="_self">compiler manual</A>: "Known C++ Issues in the HC(S)08 Compilers".</P></BODY></HTML> Mon, 12 Mar 2012 23:35:58 GMT https://community.nxp.com/t5/CodeWarrior-for-MCU/C-code-in-my-project/m-p/215637#M8474 NavidadRedivivu 2012-03-12T23:35:58Z