Link Errors

sebikoo — Mon, 24 Nov 2008 06:07:35 GMT

Hello.

Recently, I received a project file to

analyze it. This prject is mainly generated by Processor expert.

- CW IDE Version: 4.5

- Chip: MC9S12XDP512

However, When making,

it causes so many link errors,

and warnings. As I am unfortunately still not familiar with

CW IDE and Freescale chips, it has been

so difficult for me with those errors.

Thus, I here attach a whole project file

to be analyzed by gurus.

This project is really get me depressed.

sebikoo

Message Edited by sebikoo on 2008-11-23 10:13 PM

Train1.zip

Message Edited by t.dowe on 2009-10-22 09:17 AM

Re: Link Errors

CrasyCat — Mon, 24 Nov 2008 21:21:49 GMT

Hello

Here I would advise you to contact whoever did generate that project. The problem is not related to CodeWarrior or Processor Expert, but with the project you are using.

I do not understand what the person, who has generated the project did try to achieve here, but modifying

ProcessorExpert generated code is a very bad idea.

Also merging content from several modules created by ProcessorExpert is a very bad idea.

There are a lot of functions which are implemented in 2 modules (for some reasons).

I would recommend you to remove the file IO_Ports.c from the project, also remove file rs485_rs232.c from the project.

Also for some reason, content from several modules have been merged in events.c. I do not understand what is the reasoning behind that.

So I would suggest you to contact the creator of the project and ask him to provide a fixed version of his project.

CrasyCat

CodeWarrior for MCU中的主题 Link Errors

Link Errors

Re: Link Errors