Opening Project made by another gives me errors on My codewarrior

sebikoo — Sat, 15 Nov 2008 16:51:10 GMT

Hello. I am really new to codewarrior and freescale.

I just get some source code from somebody for study.

CPU model is S12XDP512, and Project was made by IDE V 4.5

Now I am using IDE V 4.7.1

When I open that project file(*.mcp), I just get two errors from errow window.

First error massege is below..

-------------------------------------------------------------------------------------------------------------

CPU
|_!ERROR: ERROR int the bean setting. More details provided by Bean inspector

for this bean.

So, I double-click it, then go to bean inspector for CPU below.

MEMORY MODEL                             BANKED
!GENERATE PRM FILE                     yes
STACK specification                         SIZE
    STACK SIZE                                   0080
!Memory segments
    Set default memory segments        Click to set default
   !ROM/RAM segments                      34 +-
     !Segment0                                     Enabled EEPROM
       Name                                           EEPROM   Value(unique identifier)is duplicated

with another module in project
Qualifier NO_INIT Warning: This segment is not used

by default. It is necessary to

specify user placement manually.
---------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------

Second one is below

! EEPROM
|_ERROR: Erro in the bean settin. More details........

So, I double-click it, the go to Bean Inspector EEprom:IntEEPROM

Bean name                     EEprom
EEPROM                         intEEPROM    IntEEPROM
Interrup service/event    Disabled
!Address range
   !Start address                 0      There is I/O Space from 0x0000 to 0x07FF, but

required memory is internal EEPROM.
!Used size 0 Set correct size of the EEPROM array. The bean

                                                   inspector expected non-zero size of the used array.
    Used exclusively            yes
   !Page size                       400 Maximum value available in actual bean setting

is only 0 Bytes.
--------------------------------------------------------------------------------------------------------------

Something is wrong on banked memory setting on CPU bean, and intEEPROM bean.

I could not find out. Please some one help me out to complie and debug it on my

Codewarrior.

Regards..

Re: Opening Project made by another gives me errors on My codewarrior

ProcessorExpert — Tue, 18 Nov 2008 19:18:35 GMT

This problem is due to conversion process from CW 4.5 to CW 4.7.

It is not possible to define a EEPROM device from two places (IntEEPROM bean and CPU bean in Build options tab) therefore you should disable the Segment0 (EEPROM) in the CPU bean and specify it in the IntEEPROM bean. The error should disappear.

best regards
Vojtech Filip
Processor Expert Support Team
UNIS

topic Opening Project made by another gives me errors on My codewarrior in CodeWarrior for MCU

Opening Project made by another gives me errors on My codewarrior

Re: Opening Project made by another gives me errors on My codewarrior