CodeWarrior for MCU中的主题 codewarrior for MC13192 SARD applications

codewarrior for MC13192 SARD applications

pabloluis — Tue, 20 Feb 2007 02:18:18 GMT

Hi, I have some applications for the MC13192 SARD transceiver from freescale but I can't debug those projects because Codewarriors saids that I can only debug programas up to 1024 bytes. What can I do?

Thanks

Re: codewarrior for MC13192 SARD applications

CrasyCat — Tue, 20 Feb 2007 18:21:17 GMT

Hello

What is the size of your application (You can check that in the .map file)?

You probably need a special edition license to be able to debug.

Which version of CodeWarrior are you using?
To retrieve that info:
    - Start CodeWarrior
    - Select Help -> About Freescale CodeWarrior
    - Click on "Install Products"
    - CodeWarrior version used is displayed on top in the Installed Products dialog.

If you are using V3.x, special edition license were not part of the installation and you need to ask for one.

CrasyCat

Re: codewarrior for MC13192 SARD applications

pabloluis — Wed, 21 Feb 2007 00:46:40 GMT

OK thank you, I have a 3.1 version, what I have to do to get a license? It's for free?

Thanks

Re: codewarrior for MC13192 SARD applications

bigmac — Wed, 21 Feb 2007 12:43:02 GMT

Hello,

The free, special edition licence will increase the code size limit to 16K, for programs written in C. There is also a limit of 32 for the number of files a project may contain.

It is possible that some of the SARD application programs available may exceed one or other of these limits. You would not be able to compile and link these programs without purchasing a more extensive licence.

Regards,

Mac

Message Edited by bigmac on 2007-02-2102:47 PM

Re: codewarrior for MC13192 SARD applications

peg — Wed, 21 Feb 2007 13:14:04 GMT

Hi,

All of the examples for the SARD boards have been especially engineered to fit within the "special licence" limitations. This has been effected by using pre-compiled libraries I believe.

Re: codewarrior for MC13192 SARD applications

CrasyCat — Wed, 21 Feb 2007 17:03:13 GMT

Hello

If you have a CodeWarrior V3.1, you have two solutions:

1- You upgrade to V5.1 Special edition license is available for free when you install that software.

2- If you need to stick with V3.1, I have attached a V3.1 special edition license for your convenience.

Just rename the attached file to license.dat and place it in your V3.1 root installation directory.

Do not use that file for V5.x. These versions are installing a special Edition license automatically.

I hope that helps.

CrasyCat

Re: codewarrior for MC13192 SARD applications

pabloluis — Thu, 22 Feb 2007 23:52:29 GMT

Thank you! Now all is working