CodeWarrior for MCUのトピックstrtod() problems https://community.nxp.com/t5/CodeWarrior-for-MCU/strtod-problems/m-p/186510#M6476 <HTML><HEAD></HEAD><BODY><DIV>I have been building code for the 9S12X processor and only using the integer library.&nbsp; I now have a need to deal with floating point and so swapped out the lib from ansixli.lib to ansixlf.lib</DIV><DIV>&nbsp;</DIV><DIV>when I try to use the strtod() function I get the wrong results and the function writes over the top of the string that I am trying to parse at the point where the asci representation of the floating point number ends.</DIV><DIV>&nbsp;</DIV><DIV>any recomendations?</DIV></BODY></HTML> Wed, 06 Feb 2008 03:11:27 GMT mikey1 2008-02-06T03:11:27Z strtod() problems https://community.nxp.com/t5/CodeWarrior-for-MCU/strtod-problems/m-p/186510#M6476 <HTML><HEAD></HEAD><BODY><DIV>I have been building code for the 9S12X processor and only using the integer library.&nbsp; I now have a need to deal with floating point and so swapped out the lib from ansixli.lib to ansixlf.lib</DIV><DIV>&nbsp;</DIV><DIV>when I try to use the strtod() function I get the wrong results and the function writes over the top of the string that I am trying to parse at the point where the asci representation of the floating point number ends.</DIV><DIV>&nbsp;</DIV><DIV>any recomendations?</DIV></BODY></HTML> Wed, 06 Feb 2008 03:11:27 GMT https://community.nxp.com/t5/CodeWarrior-for-MCU/strtod-problems/m-p/186510#M6476 mikey1 2008-02-06T03:11:27Z Re: strtod() problems https://community.nxp.com/t5/CodeWarrior-for-MCU/strtod-problems/m-p/186511#M6477 <HTML><HEAD></HEAD><BODY><DIV>I just answered my own question.&nbsp; I had selected the wrong floating point lib.&nbsp; I should have used "ansixl.lib" instead of&nbsp; "ansixlf.lib"</DIV><DIV>&nbsp;</DIV><DIV>I hope this mistake helps someone else</DIV><DIV>&nbsp;</DIV><DIV>&nbsp;</DIV></BODY></HTML> Wed, 06 Feb 2008 03:46:27 GMT https://community.nxp.com/t5/CodeWarrior-for-MCU/strtod-problems/m-p/186511#M6477 mikey1 2008-02-06T03:46:27Z