CodeWarrior for MCUのトピックRe:CW08 5.1 - Running SubWCRev during build

CW08 5.1 - Running SubWCRev during build

ChrisL — Mon, 26 Mar 2007 21:46:25 GMT

Hi-

I want to set up my current project so Codewarrior will run SubWCRev before each build (to include version info in my source files). Is there a fairly easy way of doing this? Thanks

--
Alban Edit: Added CW core and version in message subject.

Message Edited by Alban on 2007-03-26 09:28 PM

Re:CW08 5.1 - Running SubWCRev during build

Alban — Tue, 27 Mar 2007 02:17:07 GMT

Hello Chris and welcome,

You must have missed the discreet message put at the top and in capitals. I invite you to read it:

[IMPORTANT] When Asking about CODEWARRIOR !!!

Following the simple rules will allow the question to be considered by others and quicker replies. Answers are not necessarily the same on each core.

Regards, Alban.

--
Edit: link colour to scheme
Message Edited by Alban on 2007-03-26 08:18 PM
--
Alban Edit: Added CW core and version in message subject.

Message Edited by Alban on 2007-03-26 09:29 PM

Re: CW08 5.1 - Running SubWCRev during build

ChrisL — Tue, 27 Mar 2007 03:21:30 GMT

My mistake-all development is being done in Codewarrior for Freescale HC08 V5.1. Target is an HCS08 core (using an MC9S08GB60A to be exact).

--
Alban Edit: Added CW core and version in message subject.

Message Edited by Alban on 2007-03-26 09:30 PM

Re: CW08 5.1 - Running SubWCRev during build

CrasyCat — Tue, 27 Mar 2007 17:23:36 GMT

Hello

There is no easy way to execute a specified batch file (executable) prior to building from the IDE.

You will have to start the executable manually before building.

Alternatively you can decide to build using a make file instead of using the IDE for building.

Inside of a make file the target BEFORE is executed prior to the build.

CrasyCat