topic CodeWarrior V3.0 with Cyclone Pro? in CodeWarrior for MCU

CodeWarrior V3.0 with Cyclone Pro?

ThomasH — Mon, 26 Mar 2007 20:51:46 GMT

I have to program/debug a HC08 system. For this I have the CodeWarrior V3.0 and a P&E Cyclone Pro. If I want to debug the HC08 I´m not able to select the Cyclone Pro (connected with USB to the PC) There is only the possibility to select a COM port. But If I use a COM port the Cyclone Pro crashes (display and led´s dark, buttons no reaction).

So is it possible that the CodeWarrior V3.0 for HC08 does not support the actual CyclonePro?

Thanks and best regards

Thomas

Re: CodeWarrior V3.0 with Cyclone Pro?

J2MEJediMaster — Mon, 26 Mar 2007 21:05:26 GMT

I think for USB support you'll need CodeWarrior 3.1.

---Tom

Re: CodeWarrior V3.0 with Cyclone Pro?

ThomasH — Mon, 26 Mar 2007 21:42:57 GMT

I have also tried it with the serial port (Class V - P&E Cyclone interface...) but there the error message "P&E MON08 interface not detected...." appears. In this case the Cyclone´s display and LED´s are completely dark till I close the COM port.