CodeWarrior for MCUのトピックHCS x RS08 MCU https://community.nxp.com/t5/CodeWarrior-for-MCU/HCS-x-RS08-MCU/m-p/182534#M6224 <HTML><HEAD></HEAD><BODY><DIV>Hi! We wrote a program in assembly for the RS08KA2. It worked already without problem. Now, we are trying to burn a chip (RS08), with the same program (using Softec DEMORS08KA2),&nbsp;but apears : " The code to be loaded does not match with the CPU type of the target ("RS08 vs HC08")! Do you want to load anyway?</DIV><DIV>Trying to load, came another error "Error while writing to FFFE...101FE. Information no memory at this adress.</DIV><DIV>The MCU is realy&nbsp;a RS08KA2 !</DIV><DIV>Please help us.&nbsp;</DIV></BODY></HTML> Thu, 28 Aug 2008 22:20:02 GMT jlflorio 2008-08-28T22:20:02Z HCS x RS08 MCU https://community.nxp.com/t5/CodeWarrior-for-MCU/HCS-x-RS08-MCU/m-p/182534#M6224 <HTML><HEAD></HEAD><BODY><DIV>Hi! We wrote a program in assembly for the RS08KA2. It worked already without problem. Now, we are trying to burn a chip (RS08), with the same program (using Softec DEMORS08KA2),&nbsp;but apears : " The code to be loaded does not match with the CPU type of the target ("RS08 vs HC08")! Do you want to load anyway?</DIV><DIV>Trying to load, came another error "Error while writing to FFFE...101FE. Information no memory at this adress.</DIV><DIV>The MCU is realy&nbsp;a RS08KA2 !</DIV><DIV>Please help us.&nbsp;</DIV></BODY></HTML> Thu, 28 Aug 2008 22:20:02 GMT https://community.nxp.com/t5/CodeWarrior-for-MCU/HCS-x-RS08-MCU/m-p/182534#M6224 jlflorio 2008-08-28T22:20:02Z Re: HCS x RS08 MCU https://community.nxp.com/t5/CodeWarrior-for-MCU/HCS-x-RS08-MCU/m-p/182535#M6225 <HTML><HEAD></HEAD><BODY><DIV>Hello</DIV><DIV>&nbsp;</DIV><DIV>It looks like there is a disconnect between your .Abs file and the device you have selected in the debugger.</DIV><DIV>&nbsp;</DIV><DIV>Can you please check&nbsp;the following:</DIV><DIV>&nbsp; - Open your project in CodeWarrior the usual way.</DIV><DIV>&nbsp; - Open the Target settings dialog (Press ALT + F7)</DIV><DIV>&nbsp; - In the "Target Settings" panel how is the "Linker" configured?</DIV><DIV>&nbsp;&nbsp;&nbsp;&nbsp; It should be "Linker for RS08"</DIV><DIV>&nbsp;&nbsp;&nbsp; If this is not the case change that and rebuild.</DIV><DIV>&nbsp;- Start the debugger now</DIV><DIV>&nbsp;- Select inDart-Hc08 -&gt; MCU / Configuration</DIV><DIV>&nbsp; - What is the device configured here? It should be DEMORS08KA2 as far as I know.</DIV><DIV>&nbsp;</DIV><DIV>Is it working better?</DIV><DIV>&nbsp;</DIV><DIV>CrasyCat</DIV></BODY></HTML> Fri, 29 Aug 2008 16:07:26 GMT https://community.nxp.com/t5/CodeWarrior-for-MCU/HCS-x-RS08-MCU/m-p/182535#M6225 CrasyCat 2008-08-29T16:07:26Z