warning C2705 - cw10.1

roberto_m — Fri, 11 Nov 2011 18:28:34 GMT

Hi to all,

In my new «adventure» with CW10.1 (porting a project, based on hcs08 qe64, from CW 6.3), I meet a lot of «warnings».

Warnings (they weren't with CW 6.3) are generated by:

TPM1C2SC &= ~TPM1C2SC_CH2F_MASK;

I think because (from help)

CodeWarrior for Microcontrollers V10.x > HCS08/RS08 for Microcontrollers > RS08 Build Tools Reference Manual > Porting Tips and FAQs

Number Formats

Valid constant floating number suffixes are f and F for float and l or Lfor long double. Note that floating constants without suffixes are double constants in ANSI. For exponential numbers e or E has to be used. - and + can be used for signed representation of the floating number or the exponent.

The following suffixes are supported (Table A.2):

Table A.2 Supported number suffixes

Constant	Suffix	Type
floating	F	float
floating	L	long double
integral	U	unsigned in t
integral	uL	unsigned long

#define TPM1C2SC_CH2F_MASK 128U

U => implies unsigned int (16 bit). Registers of qe64 are 8 bit wide.

How can I avoid C2705 without disable it (with #PRAGMA)?

Re: warning C2705 - cw10.1

CrasyCat — Fri, 11 Nov 2011 20:27:16 GMT

Hello

You can use an explicit cast to tell the compiler you want the value to be treated as 8-bit value.

CrasyCat

Re: warning C2705 - cw10.1

roberto_m — Fri, 11 Nov 2011 21:32:03 GMT

Yes, this is a way.

But why use in mc9s08qe64.h « - 18.05.2010, V2.32 - MISRA compliance: U/UL suffixes added to all numbers (_MASK,_BITNUM and addresses) » that implies 16-bit vaule even if qe64 is an 8-bit mcu?

topic Re: warning C2705 - cw10.1 in CodeWarrior for MCU

warning C2705 - cw10.1

Re: warning C2705 - cw10.1

Re: warning C2705 - cw10.1