CodeWarrior for MCUのトピックMaking LIBS

Making LIBS

etolocka — Sat, 11 Feb 2006 04:02:11 GMT

Hi!

I´m using CW for HC(S)08 and I´m a little confused about the right procedure to make a LIB file from several ".c" files with functions.

Any advice?

regards,
Ernesto
http://www.desarrollos.tolocka.com.ar
http://www.mundomicro.com.ar

Re: Making LIBS

CompilerGuru — Sun, 12 Feb 2006 02:04:54 GMT

to create a library, switch the Linker in the "Target Settings" page from "Linker for HC08" to "Libmaker for HC08". Then a new Libmaker for HC08 page shows up where you can specify the library name.

Re: Making LIBS

etolocka — Tue, 14 Feb 2006 21:30:41 GMT

Thank you!

Do I need to remove all libs and headers from the LIB folder in the Project Manager? (e.g. ansi.lib)

Regards,
Ernesto.

Re: Making LIBS

CompilerGuru — Thu, 16 Feb 2006 07:00:56 GMT

You probably only should have your own C files in your project to create the library, well it depends on what the library is for.
For a general purpose lib, I would not put the ansi*.lib, start*.c, datapage.c inside of it.

PS: What for a library do you create anyway?

Re: Making LIBS

etolocka — Fri, 17 Feb 2006 04:01:54 GMT

I want to create a library with general functions for several text LCDs.

Another question: What about the header file? Do I need to include it in one of the ".c" files? (e.g. the first one) using the "include" directive?

Regards,
Ernesto.

Re: Making LIBS

lucianon — Sun, 07 Aug 2011 04:30:53 GMT

Spoiler

this is my contribution to undestand how to make libs on CW6.

lib (it is the project to generate "out.lib")

testelib (it is the project that are using this generated lib "out.lib")

Luciano Nicolau

www.tci.ind.br

Re: Making LIBS

lucianon — Thu, 27 Jun 2013 16:47:10 GMT

here are attached the projects to understand how to create libs on CW6.3 .

Luciano