topic Re: Programming flash memory on 9S12C32 in CodeWarrior for MCU https://community.nxp.com/t5/CodeWarrior-for-MCU/Programming-flash-memory-on-9S12C32/m-p/171171#M5285 <HTML><HEAD></HEAD><BODY><DIV>Hello</DIV><DIV>&nbsp;</DIV><DIV>If you wish to program your application from CodeWarrior into flash, just make sure you are using</DIV><DIV>Multilink/CyclonePro as connection and then build your application and press the debug button.</DIV><DIV>&nbsp;</DIV><DIV>The application to be debugged will be automatically programmed into flash.</DIV><DIV>&nbsp;</DIV><DIV>Be careful, CodeWarrior is not a production flash programming tool.</DIV><DIV>It is&nbsp;a development software allowing you to build and debug applications.</DIV><DIV>&nbsp;</DIV><DIV>If you are looking for a production flash programming tool, you need to look for other alternatives.</DIV><DIV>I know P&amp;E and Softec have such tools available.</DIV><DIV>Might be other out there.</DIV><DIV>&nbsp;</DIV><DIV>I hope this helps.</DIV><DIV>&nbsp;</DIV><DIV>CrasyCat</DIV></BODY></HTML> Fri, 07 Dec 2007 20:40:39 GMT CrasyCat 2007-12-07T20:40:39Z Programming flash memory on 9S12C32 https://community.nxp.com/t5/CodeWarrior-for-MCU/Programming-flash-memory-on-9S12C32/m-p/171170#M5284 <HTML><HEAD></HEAD><BODY><SPAN>Hello,</SPAN><BR /><BR /><SPAN>I am using Codewarrior 5.7 for the HC12 hardware.</SPAN><BR /><BR /><SPAN>I have been unable to find any way to program my chip's flash memory with something that is supposed be to called the Flash Programmer. Could anyone please show me the way?</SPAN><BR /><BR /><SPAN>Thanks,</SPAN><BR /><BR /><SPAN>lromanov</SPAN><BR /><DIV> </DIV></BODY></HTML> Fri, 07 Dec 2007 05:52:53 GMT https://community.nxp.com/t5/CodeWarrior-for-MCU/Programming-flash-memory-on-9S12C32/m-p/171170#M5284 lromanov 2007-12-07T05:52:53Z Re: Programming flash memory on 9S12C32 https://community.nxp.com/t5/CodeWarrior-for-MCU/Programming-flash-memory-on-9S12C32/m-p/171171#M5285 <HTML><HEAD></HEAD><BODY><DIV>Hello</DIV><DIV>&nbsp;</DIV><DIV>If you wish to program your application from CodeWarrior into flash, just make sure you are using</DIV><DIV>Multilink/CyclonePro as connection and then build your application and press the debug button.</DIV><DIV>&nbsp;</DIV><DIV>The application to be debugged will be automatically programmed into flash.</DIV><DIV>&nbsp;</DIV><DIV>Be careful, CodeWarrior is not a production flash programming tool.</DIV><DIV>It is&nbsp;a development software allowing you to build and debug applications.</DIV><DIV>&nbsp;</DIV><DIV>If you are looking for a production flash programming tool, you need to look for other alternatives.</DIV><DIV>I know P&amp;E and Softec have such tools available.</DIV><DIV>Might be other out there.</DIV><DIV>&nbsp;</DIV><DIV>I hope this helps.</DIV><DIV>&nbsp;</DIV><DIV>CrasyCat</DIV></BODY></HTML> Fri, 07 Dec 2007 20:40:39 GMT https://community.nxp.com/t5/CodeWarrior-for-MCU/Programming-flash-memory-on-9S12C32/m-p/171171#M5285 CrasyCat 2007-12-07T20:40:39Z