CodeWarrior for MCUのトピックHow to handle CW assembler for one main source file and more secondary file in CW 5.0 for HCS(X)12 ?

How to handle CW assembler for one main source file and more secondary file in CW 5.0 for HCS(X)12 ?

MarkMa — Sun, 03 Jun 2012 22:47:50 GMT

Hi all,

I am working on absolute an assembler project, I want to using one main source file an more secondry file to buildup the project, but i meet some problem. Please help to check.

My environment is: WinXP SP3, CW 5.0 for HCS(X)12

I attach my project file

Thank you and best regards

Re: How to handle CW assembler for one main source file and more secondary file in CW 5.0 for HCS(X)

CrasyCat — Mon, 04 Jun 2012 13:11:57 GMT

Hello

If you intend to use absolute assembly, your application needs to be encoded in one single assembly unit.

So you should have one single .asm file in your project. You can then include other files in there.

Do not use the extension ,asm for include files. The project manager will attempt to assemble all files

with this extension.

CrasyCat