topic Re: Hot to program from command line? in CodeWarrior for MCU

Hot to program from command line?

PW_CTL — Wed, 11 Mar 2009 22:41:41 GMT

Hello.

I am searching for a fast way to program some MCUs with a usb bdm programmer (P&E multilink cable). Is it possible with the application "burner.exe"? Is there any simple bdm programmer from command line?

Thanks.

Re: Hot to program from command line?

peg — Thu, 12 Mar 2009 04:38:18 GMT

Hello,

P&E Micro include a commnd line programmer with their S08 Programming software (PROGHCS08)

Re: Hot to program from command line?

stanish — Thu, 12 Mar 2009 22:16:35 GMT

Hi,

check the thread here. It's dedicated to HC12 but it might help you.

Stanish

Re: Hot to program from command line?

PW_CTL — Thu, 12 Mar 2009 22:29:08 GMT

Thanks. Probably the P&E software is the best option, but right now it is enough for me with hiwave.

hiwave.exe C:\...\project.s19 -W -Prod=C:\...\P&E_ICD.ini -instance=sim

It works succesfully after selecting the MCU and two clicks. Do you have documentation about hiwave.exe and its paramaters? I would like to do an automatic process launched by command line, if possible.

Thanks for your help!

Re: Hot to program from command line?

stanish — Thu, 12 Mar 2009 23:02:35 GMT

See the debugger manual ("<CodeWarrior install directory>\help\pdf\Debugger_HCxx.pdf", search section "Command Line Options").

Stanish

Re: Hot to program from command line?

PW_CTL — Fri, 13 Mar 2009 00:12:38 GMT

Thanks for your help. I got my command-line programmer!.