topic LC60: How many instruction did my application use? in CodeWarrior for MCU

LC60: How many instruction did my application use?

BasePointer — Mon, 28 Apr 2008 20:14:54 GMT

Hi,

I'm using CW 6.1 and C for my LC60 application.

Can CW tell me how many instruction my application used?

Not program memory, I need instruction count.

Regards,

BP.

CrasyCat — Mon, 28 Apr 2008 20:21:47 GMT

Hello

I am not aware of such a feature.

Why do you need to know that?

CrasyCat

BasePointer — Mon, 28 Apr 2008 21:07:06 GMT

Hi,

I want to compare it with other companies requirements.

Can I save or export assembly window in hi-ware?

10x,

BP.

CrasyCat — Tue, 29 Apr 2008 17:04:18 GMT

Hello

No this is not working either.

What you can do is either disassemble the .abs file and look at the listing file

or use the command DASM

1- Disassemble the abs file:

- Open a Window Explorer window

- Browse for {Install}\prog

- Start Decoder.exe

- Select "File" -> "Open" and select your .abs file name.

The decoder will generate a file with extension .lst containing disassembled code of the application.

As far as I remember the will will contains disassembly listing of all code and constant sections.

You can also start the decoder from the command line if you prefer.

2- Use command DASM

In order to disassemble code between 0x1870 and 0x19FF, enter the following commands in the

command window:

LF logfile.txt

DASM 0x1870..0x19FF

NOLF

From the MAP file you can retrieve the start and end address of the memory areas used by the application.

I hope this helps.

CrasyCat