IDE tree problem

electropw — Tue, 15 Apr 2008 10:45:44 GMT

Sorry to be a pain again, but just trying to get up to speed with CW.

I'm having trouble with the ide for HCS12, specifically the file tree view.

I have created my project and under the sources group I have created a number of groups that generally follow the actual structure stored on disk.

These can be up to 3 or 4 levels deep with appropriate source files in each.

I'm assuming under CW that the actual groups don't actually play any real part in the project other than for easy navigation.

However, the problem I'm having is that I can play with the project all day and save it etc but when I start up CW next time it pops up with a message box as follows.

"Files missing from File view hierarcy."

(Some files were missing from the hierarcy information

for the files view of Project "XXXX.mcp". These files have

been added to the files view hierarcy in a group called

"Rescued Items".)

Consequently, A group called 'rescued items' is created and a number of files from differing groups within the project groupings are copied there. At the same time the original corresponding files remain in their previously placed positions.

When you compile etc these files in the rescued group are marked n/a whilst the originals are compiled normally.

Any ideas what is going on?

regards

Phil

Re: IDE tree problem

CrasyCat — Tue, 15 Apr 2008 18:14:33 GMT

Hello

There is a FAQ on the Freescale web site around that topic.

Please go to www.freescale.com and search for FAQ-28410

You should be able to find some hints there.

CrasyCat

Re: IDE tree problem

electropw — Wed, 16 Apr 2008 06:37:45 GMT

Great, thanks for your help.

Phil

topic IDE tree problem in CodeWarrior for MCU

IDE tree problem

Re: IDE tree problem

Re: IDE tree problem