CodeWarrior for MCUのトピックRe: CW4.6 - Error starting external debugger. Process Error Code 87 (0x57)

CW4.6 - Error starting external debugger. Process Error Code 87 (0x57)

trav — Tue, 11 Sep 2007 05:12:38 GMT

Ok then how about this error.

Error starting external debugger. Process Error Code 87 (0x57)
The parameter is incorrect.

Is there a work around for this?

Travis

--
Alban Edit: FSL Part Number in Subject line + split/moved to appropriate location.
From: http://forums.freescale.com/freescale/board/message?board.id=CWCOMM&message.id=5253

Message Edited by Alban on 2007-09-11 04:24 PM

Re: CW4.6 - Error starting external debugger. Process Error Code 87 (0x57)

CompilerGuru — Tue, 11 Sep 2007 19:40:15 GMT

That problem has been fixed in CW for MCU's 6.0 (HC08) but not in the last released version for the HC12 (4.6) yet :smileysad:.
The problem is "just" when it tries to launch the external debugger hiwave.exe from within the ide.
A possible workaround would be to start hiwave.exe externally, see the arguments in the ide how hiwave is called, or start hiwave via explorer, load the *.ini as configuration and flash the *.abs explicitely.

Daniel

--
Alban Edit: FSL Part Number in Subject line + split/moved to appropriate location.

Message Edited by Alban on 2007-09-11 04:25 PM

Re: CW4.6 - Error starting external debugger. Process Error Code 87 (0x57)

admin — Sun, 18 Jan 2009 00:44:44 GMT

Hi,

is this problem fixed allready?

I can start my debugger once,...
Than when i try it again it gives me that error code...

Greets Pieter

Re: CW4.6 - Error starting external debugger. Process Error Code 87 (0x57)

CompilerGuru — Sun, 18 Jan 2009 08:50:39 GMT

Try using 4.7.
I assume this version addresses it, however I don't have vista or 4.7, so I cannot verify.
But I'm pretty sure this issue is fixed in 4.7.

Daniel