CodeWarrior for MCUのトピックRe: No Valid License Key Found - Freescale Codewarrior HC08 V5.1

No Valid License Key Found - Freescale Codewarrior HC08 V5.1

FernandoValle — Wed, 07 Feb 2007 05:19:50 GMT

I just installed Codewarrior HC08 V5.1, with updates, on my Windows Xp Pro Sp2 system (not running microsoft office...). I am using remote desktop to access this system. However, when I try to run Codewarrior, i get the following message:

Error

No valid license key was found for this version of Codewarrior Development Studio. Please register your product by following the instructions on the registration card or by license@freescale.com.

Terminal server remote client not allowed

Feature: Win32_CWIDE_Limited

Licence path: C:\Program Files\Freescale\CodeWarrior for HC08 V5.1 - \license.dat

FLEXlm error: -103,577

For further information, refer to the FLEXlm End User Manual, available at www.macrovision.com.

Any help would be appreciated

Re: No Valid License Key Found - Freescale Codewarrior HC08 V5.1

Nabla69 — Wed, 07 Feb 2007 07:00:50 GMT

Hello,

You cannot use Windows Remote Desktop to launch CodeWarrior.
Even with the full professional Edition (the one I use).
This is confirmed by the error message which states "Terminal Server Remote client Not Allowed".

The solution is to start CodeWarrior on the computer itself and lock the session.
Then, you use Remote Desktop under the same session username to gain access remotely.

Rob.

Re: No Valid License Key Found - Freescale Codewarrior HC08 V5.1

koubis — Wed, 07 Feb 2007 22:55:28 GMT

Please send this issue to license@freescale.com, Licensing team will generate license with enabled Terminal services.
Please attach this error message and your license.dat file (or registration number).

Best Regards

Re: No Valid License Key Found - Freescale Codewarrior HC08 V5.1

CompilerGuru — Thu, 13 Mar 2008 10:41:58 GMT

For the HC08, actually the build tools check the license independently of the IDE at compile time.

So while starting up the ide upfront helps with the ide license, the 8/16 bit build tools will still run in demo mode (say limited to 1k (or more, depending on the core) unless the license explicitly allows to use the terminal server.

See also.

http://forums.freescale.com/freescale/board/message?board.id=CW816COMM&message.id=4005&jump=true#M4005