topic Re: CW 08 V5.1 + simulation elements in CodeWarrior for MCU

CW 08 V5.1 + simulation elements

maverick — Tue, 09 Jan 2007 17:59:41 GMT

Hello,

I would like to know how can I use the simulation elements (as leds, lcd, switchs) on the full ship simulator for codewarrior V5.1.

Thanks.

maverick

Re: CW 08 V5.1 + simulation elements

J2MEJediMaster — Tue, 09 Jan 2007 22:40:41 GMT

Read the Codewarrior Debugger manual, paying close attention to the section on Debugger Components. That is where I found information for the HC12Sx tools. I'm assuming--dangerously, of course--that the HC08 documentation would be arranged along similar lines.

----Tom

Re: CW 08 V5.1 + simulation elements

CompilerGuru — Wed, 10 Jan 2007 10:01:47 GMT

Note that the HC08 and the HC12 simulators are different, they use a different technology.
So the HC12 manual does not directly aply to the HC08 (the HC08 manual does aply, but I dont have it here in front of me).
The simplest way to generate some UI is to use the visualization tool (Components -> Open, select Visualization )
Then create some instruments and set their port to variable or memory.

Message Edited by CompilerGuru on 2007-01-1003:05 AM