topic Re: Trimming HCS08 in DEBUG MODE in CodeWarrior for MCU https://community.nxp.com/t5/CodeWarrior-for-MCU/Trimming-HCS08-in-DEBUG-MODE/m-p/141129#M2629 <HTML><HEAD></HEAD><BODY><DIV></DIV><P>Ok, if there is not a similar way then you probably can't do it via CW.</P><P>David</P><P>&nbsp;</P></BODY></HTML> Wed, 28 Jun 2006 04:06:26 GMT peg 2006-06-28T04:06:26Z Trimming HCS08 in DEBUG MODE https://community.nxp.com/t5/CodeWarrior-for-MCU/Trimming-HCS08-in-DEBUG-MODE/m-p/141126#M2626 <HTML><HEAD></HEAD><BODY><DIV>Hello,</DIV><DIV>Does anyone know how to trim the internal clock generator of my HCS08 when run HiWave (Debugger) from CW 5.0?</DIV><DIV>&nbsp;</DIV><DIV>Thanks</DIV></BODY></HTML> Tue, 27 Jun 2006 16:44:58 GMT https://community.nxp.com/t5/CodeWarrior-for-MCU/Trimming-HCS08-in-DEBUG-MODE/m-p/141126#M2626 Andrew 2006-06-27T16:44:58Z Re: Trimming HCS08 in DEBUG MODE https://community.nxp.com/t5/CodeWarrior-for-MCU/Trimming-HCS08-in-DEBUG-MODE/m-p/141127#M2627 <HTML><HEAD></HEAD><BODY><DIV></DIV><P>Hi Andrew,</P><P>If you are using a P&amp;E Multilink or Cyclone...</P><P>Under the MultilinkCyclonePro menu</P><P>Select "Advanced Programming/Debug Options"</P><P>Then make sure there is a tick beside</P><P>"Calculate Trim and Programme Non-Volatile Trim Register"</P><P>That's it!</P><P>Regards David</P><P>&nbsp;</P></BODY></HTML> Tue, 27 Jun 2006 17:21:49 GMT https://community.nxp.com/t5/CodeWarrior-for-MCU/Trimming-HCS08-in-DEBUG-MODE/m-p/141127#M2627 peg 2006-06-27T17:21:49Z Re: Trimming HCS08 in DEBUG MODE https://community.nxp.com/t5/CodeWarrior-for-MCU/Trimming-HCS08-in-DEBUG-MODE/m-p/141128#M2628 <HTML><HEAD></HEAD><BODY><DIV></DIV><P>No,</P><P>I'm using the&nbsp;InDART of the Softec.</P><P>&nbsp;</P></BODY></HTML> Tue, 27 Jun 2006 17:27:21 GMT https://community.nxp.com/t5/CodeWarrior-for-MCU/Trimming-HCS08-in-DEBUG-MODE/m-p/141128#M2628 Andrew 2006-06-27T17:27:21Z Re: Trimming HCS08 in DEBUG MODE https://community.nxp.com/t5/CodeWarrior-for-MCU/Trimming-HCS08-in-DEBUG-MODE/m-p/141129#M2629 <HTML><HEAD></HEAD><BODY><DIV></DIV><P>Ok, if there is not a similar way then you probably can't do it via CW.</P><P>David</P><P>&nbsp;</P></BODY></HTML> Wed, 28 Jun 2006 04:06:26 GMT https://community.nxp.com/t5/CodeWarrior-for-MCU/Trimming-HCS08-in-DEBUG-MODE/m-p/141129#M2629 peg 2006-06-28T04:06:26Z