topic Re: Help on Uart files in CodeWarrior for MCU https://community.nxp.com/t5/CodeWarrior-for-MCU/Help-on-Uart-files/m-p/125821#M251 <HTML><HEAD></HEAD><BODY><DIV></DIV><DIV>I suggest that you modify the TestUart.c file to replace its functions with stubs. Empty functions will take up less space in your executable image while satisfying the linker.</DIV><DIV>&nbsp;</DIV><DIV>Marc.</DIV></BODY></HTML> Thu, 09 Feb 2006 01:56:56 GMT marc_paquette 2006-02-09T01:56:56Z Help on Uart files https://community.nxp.com/t5/CodeWarrior-for-MCU/Help-on-Uart-files/m-p/125820#M250 <HTML><HEAD></HEAD><BODY><DIV>Hi all..</DIV><DIV>&nbsp;</DIV><DIV>I am trying to develop a new application on top of IEEE 802.15.4 using Metrowerks CodeWarrior Special Edition for HC(S)08. I am modifying the evk_switch_demo.mcp project file for my application.</DIV><DIV>&nbsp;</DIV><DIV>One of the files used in the project is the TestUart {.c,.h}. However, I don't think I have the hardware to display the messages. I am using the MC13193 EVK. I would like to remove the two files. However, after I tried doing it, the project failed to build&nbsp;because it is dependant/being used by other files. How do I safely remove them?</DIV><DIV>&nbsp;</DIV><DIV>Thank you</DIV></BODY></HTML> Fri, 03 Feb 2006 17:01:17 GMT https://community.nxp.com/t5/CodeWarrior-for-MCU/Help-on-Uart-files/m-p/125820#M250 magic 2006-02-03T17:01:17Z Re: Help on Uart files https://community.nxp.com/t5/CodeWarrior-for-MCU/Help-on-Uart-files/m-p/125821#M251 <HTML><HEAD></HEAD><BODY><DIV></DIV><DIV>I suggest that you modify the TestUart.c file to replace its functions with stubs. Empty functions will take up less space in your executable image while satisfying the linker.</DIV><DIV>&nbsp;</DIV><DIV>Marc.</DIV></BODY></HTML> Thu, 09 Feb 2006 01:56:56 GMT https://community.nxp.com/t5/CodeWarrior-for-MCU/Help-on-Uart-files/m-p/125821#M251 marc_paquette 2006-02-09T01:56:56Z