topic Re: upgrade codeWarrior 3.0 in CodeWarrior for MCU

upgrade codeWarrior 3.0

Stormyweather — Wed, 14 Jun 2006 16:44:10 GMT

how can I upgrade codewarrior 3.0 to 3.1??

Re: upgrade codeWarrior 3.0

CrasyCat — Wed, 14 Jun 2006 17:10:03 GMT

Hello

Just ask your Freescale distributor.

Please check following URL to find your closest Freescale distributor:

http://www.freescale.com/webapp/sps/site/homepage.jsp?nodeId=01098400786959705928692

CrasyCat

Re: upgrade codeWarrior 3.0

Stormyweather — Wed, 14 Jun 2006 18:00:14 GMT

thanx.... does it cost any money or the upgrade is free of charge?/

Re: upgrade codeWarrior 3.0

CrasyCat — Wed, 14 Jun 2006 18:07:18 GMT

Normally upgrade is not free.

CrasyCat.

Re: upgrade codeWarrior 3.0

Stormyweather — Wed, 14 Jun 2006 18:34:33 GMT

I just bought the M68EVB08GB60

and the 13192 RFmodule doughter card

why didn't I get the last version of code warrior?/

instade of v3.0 from 2001!!!!??

Re: upgrade codeWarrior 3.0

CrasyCat — Wed, 14 Jun 2006 22:18:17 GMT

Hello

OK in that case you are eligible for free upgrade :smileyhappy:.

Explain that that to your Freescale distributor and you should be fine.

CrasyCat

Re: upgrade codeWarrior 3.0

CrasyCat — Wed, 14 Jun 2006 22:31:54 GMT

Just an additional note on that.

We checked our inventory and replaced all the CD in the boxes with latest tool versions.

However we cannot check inventory from our distributors.

Note that CodeWarrior for HC08 V5.1 is available for download on the web.
This tool comes directly with the appropriate license file for special edition.

That means that downloading CodeWarrior for HC08 V5.x, you will be able to start developing up to 16K of C source code right after installing.

CrasyCat.