topic Code Warrior Debugger Busy Adding variables to Data1 Window in CodeWarrior for MCU

Code Warrior Debugger Busy Adding variables to Data1 Window

anil — Tue, 21 Nov 2006 08:15:21 GMT

Subject: Description: When starting the debugger, the command file is busy repeating the commands over and over for 15 minutes or so. Data:1 ADDXPR "batt[1]" !Data:1 ADDXPR "batt[0].fault_u.u16" !Data:1 ADDXPR "fault_system_u.u16" !Data:1 ADDXPR "fault_port_u[0].u8" !Data:1 ADDXPR "av_rx_pkt_u[0].data[1]" This problem seemed to occur after I installed 4.5 on my system. 3.1 now is doing this also. This is making it real difficult to debug. I have NOT changed any of the .cmd files to cause this problem.

Re: Code Warrior Debugger Busy Adding variables to Data1 Window

CrasyCat — Tue, 21 Nov 2006 20:09:18 GMT

Hello

Can you try the following.

Close the debugger.

In the directory where the .abs file is generated (usually {Project}\bin) you have a file with extension .xpr.

Delete it and try debugging again.

Does it help?

CrasyCat

Re: Code Warrior Debugger Busy Adding variables to Data1 Window

anil — Wed, 22 Nov 2006 02:04:09 GMT

Thanks...that worked.