CodeWarrior for MCU中的主题 Re: Need code for SCI communication with interrupt https://community.nxp.com/t5/CodeWarrior-for-MCU/Need-code-for-SCI-communication-with-interrupt/m-p/137035#M1929 <HTML><HEAD></HEAD><BODY><DIV>Hello</DIV><DIV>&nbsp;</DIV><DIV>I would recommend you to try to create a project with ProcessorExpert support.</DIV><DIV>You can then configure what you want to do with your SCI interrupt and let Processor Expert generate code for you.</DIV><DIV>&nbsp;</DIV><DIV>Processor Expert will generate working application. You can then choose whether you want to continue to work with ProcessorExpert or if you want to take the generated code as a template that you integrate in your own application.</DIV><DIV>&nbsp;</DIV><DIV>CrasyCat</DIV></BODY></HTML> Mon, 18 Jun 2007 13:14:59 GMT CrasyCat 2007-06-18T13:14:59Z Need code for SCI communication with interrupt https://community.nxp.com/t5/CodeWarrior-for-MCU/Need-code-for-SCI-communication-with-interrupt/m-p/137034#M1928 <HTML><HEAD></HEAD><BODY><SPAN>Hello.</SPAN><BR /><SPAN>I have an EVB9S12NE64 board and I simply need to setup it up to read-in data through SCI1 using interrupt. Is there a good self explained code example I could use with my little knowledge in the field of embedded devices?</SPAN><BR /><BR /><SPAN>Thanks in advance.</SPAN></BODY></HTML> Sat, 16 Jun 2007 01:14:05 GMT https://community.nxp.com/t5/CodeWarrior-for-MCU/Need-code-for-SCI-communication-with-interrupt/m-p/137034#M1928 Ryu 2007-06-16T01:14:05Z Re: Need code for SCI communication with interrupt https://community.nxp.com/t5/CodeWarrior-for-MCU/Need-code-for-SCI-communication-with-interrupt/m-p/137035#M1929 <HTML><HEAD></HEAD><BODY><DIV>Hello</DIV><DIV>&nbsp;</DIV><DIV>I would recommend you to try to create a project with ProcessorExpert support.</DIV><DIV>You can then configure what you want to do with your SCI interrupt and let Processor Expert generate code for you.</DIV><DIV>&nbsp;</DIV><DIV>Processor Expert will generate working application. You can then choose whether you want to continue to work with ProcessorExpert or if you want to take the generated code as a template that you integrate in your own application.</DIV><DIV>&nbsp;</DIV><DIV>CrasyCat</DIV></BODY></HTML> Mon, 18 Jun 2007 13:14:59 GMT https://community.nxp.com/t5/CodeWarrior-for-MCU/Need-code-for-SCI-communication-with-interrupt/m-p/137035#M1929 CrasyCat 2007-06-18T13:14:59Z