topic Re: Problems of the code generated by lin stack configuration tool(NCFTool) in CodeWarrior for MCU

Problems of the code generated by lin stack configuration tool(NCFTool)

jeffcharles — Sat, 19 Sep 2020 04:38:04 GMT

Hi,

I am using the NCF tool to generate three configuration files. I found something wrong with the interface function in lin_cfg.h:

The signal size of 'S2M_Sig3' is 3 and the offset is 6, so bit 6 and bit 7 of byte 1 and bit 0 of byte 2 in the signal array 'lin_pFrameBuf' is occupied by it.

But the following macro only access the byte 1 about 'S2M_Sig3', why?

Please give me support. Thank you!

Jeff

Re: Problems of the code generated by lin stack configuration tool(NCFTool)

dianabatrlova — Tue, 22 Sep 2020 06:39:58 GMT

Hi Jeff,

Could you, please, specify which MCU you use?

Thank you.

Best regards,

Diana

Re: Problems of the code generated by lin stack configuration tool(NCFTool)

jeffcharles — Sun, 27 Sep 2020 01:01:30 GMT

Hi Diana,

I am using the MC9S12ZVL32

Best Regards,

Jeff