CodeWarrior for MCU中的主题 Programming HCS08 on Raspberry Pi

Programming HCS08 on Raspberry Pi

edasanli — Mon, 15 Jun 2020 11:03:08 GMT

I need to programming MC9S08PA4 on Raspberry Pi. I tried to install Code Warrior on RPi, but RPi is based on ARM so it could not install. I don't need to developing, I have a s19 file, just need to programming my microprocessor.

Is there someone have a solution about that?

Have a nice day.

-Eda

#mc9s08pa4‌raspberry pi‌

Re: Programming HCS08 on Raspberry Pi

vicentegomez — Mon, 15 Jun 2020 18:02:14 GMT

In order to program the S08 you will need an OSBDM, those are available on several evaluation boards or in programmers like the Universal multilink from P&E.

or you can create your own OSBDM, please check

PEmicro | Experts in Embedded tools for Flash Programming and Development

I hope this will help you

Regards

Vicente

Re: Programming HCS08 on Raspberry Pi

edasanli — Tue, 16 Jun 2020 05:21:22 GMT

I have S08PT60-EVK and PE Micro Multilink. But I need an application for programming, which can be installed on Raspberry Pi.