topic Re: CodeWarrior and TestTool.exe in CodeWarrior for MCU https://community.nxp.com/t5/CodeWarrior-for-MCU/CodeWarrior-and-TestTool-exe/m-p/124999#M150 <HTML><HEAD></HEAD><BODY><DIV>Hi xyz,</DIV><DIV>&nbsp;</DIV><DIV>You need to select "HCS08 Serial Monitor" as your connection.</DIV><DIV>Normally done as the second step in the new project wizard.</DIV><DIV>&nbsp;</DIV></BODY></HTML> Mon, 05 Mar 2007 15:58:09 GMT peg 2007-03-05T15:58:09Z CodeWarrior and TestTool.exe https://community.nxp.com/t5/CodeWarrior-for-MCU/CodeWarrior-and-TestTool-exe/m-p/124998#M149 <HTML><HEAD></HEAD><BODY><SPAN>I am trying to write a program to HCS08(GT60) using Code Warrior Special Edition through RS232 port since my MCU already has an Embedded BootLoader. Do i actually need TestTool.exe to burn my program into the MCU? If so, where can i find it? My Code Warrior Special Edition doesn't have that file....Pls help.</SPAN></BODY></HTML> Mon, 05 Mar 2007 14:31:37 GMT https://community.nxp.com/t5/CodeWarrior-for-MCU/CodeWarrior-and-TestTool-exe/m-p/124998#M149 xyz 2007-03-05T14:31:37Z Re: CodeWarrior and TestTool.exe https://community.nxp.com/t5/CodeWarrior-for-MCU/CodeWarrior-and-TestTool-exe/m-p/124999#M150 <HTML><HEAD></HEAD><BODY><DIV>Hi xyz,</DIV><DIV>&nbsp;</DIV><DIV>You need to select "HCS08 Serial Monitor" as your connection.</DIV><DIV>Normally done as the second step in the new project wizard.</DIV><DIV>&nbsp;</DIV></BODY></HTML> Mon, 05 Mar 2007 15:58:09 GMT https://community.nxp.com/t5/CodeWarrior-for-MCU/CodeWarrior-and-TestTool-exe/m-p/124999#M150 peg 2007-03-05T15:58:09Z