MC9S08PA8 and CodeWarrior Classic

adbensi — Thu, 24 Jan 2019 21:53:20 GMT

Hi!
This is my first post, and first contact with NXP products...

I trying to use the MC9S08PA8 with CodeWarrior.

I think that CodeWarrior® for MCUs (Classic IDE) 6.3 do not support it. It is right?

I wold like to met one IDE standalone for it, without eclipse, it is possible?

May be using on similar microcontroller supported by CodeWarrior 6.3, but what is more similar of the MC9S08PA8?

Sorry about my newbie questions,

Best Regards,

Alexandre

Re: MC9S08PA8 and CodeWarrior Classic

ZhangJennie — Fri, 25 Jan 2019 04:13:26 GMT

You are right CW6.3 doesn't support MC9S08PT/PA family. There is no similar classic IDE can support it.

User who use MC9S08PT/PA please use CW11 which is based on eclipse Juno.

https://www.nxp.com/support/developer-resources/software-development-tools/codewarrior-development-tools/codewarrior-leg…

Have a great day,
Jun Zhang

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

CodeWarrior for MCUのトピックRe: MC9S08PA8 and CodeWarrior Classic

MC9S08PA8 and CodeWarrior Classic

Re: MC9S08PA8 and CodeWarrior Classic