topic Re: Setting up CW 11 for specific dev board? in CodeWarrior for MCU

Setting up CW 11 for specific dev board?

zwilcox — Fri, 27 Jul 2018 21:03:06 GMT

I'm using a M54451EVB development board. I'm asked for the derivative or board I would like to use:

However, it is unable to find my board. In fact, when I expand all the options, it doesn't look like there are any boards in there.

Is there a way to set up a project to use the a specific dev board, particularly the M54451EVB?

Thank you.

Re: Setting up CW 11 for specific dev board?

ZhangJennie — Mon, 30 Jul 2018 02:13:26 GMT

You create a "New bare board project" which doesn't support selecting board as target, thus you can select chip dirivative only. The "board" you highlighted confuses users. I will report it.

If user use SDK or MQX, board can be selected. but we need check if the SDK or MQX supports this board.

Have a great day,
Jennie Zhang

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: Setting up CW 11 for specific dev board?

zwilcox — Mon, 30 Jul 2018 15:30:01 GMT

Thank you for your reply.

MQX is an RTOS right? I need to have a bare metal project.

Which SDK are you referring to?

Re: Setting up CW 11 for specific dev board?

ZhangJennie — Tue, 31 Jul 2018 02:05:19 GMT

Hi Zachary

yes, MQX is RTOS.

See SDK here

MCUXpresso SDK|NXP

Have a great day,
Jennie Zhang

Re: Setting up CW 11 for specific dev board?

zwilcox — Tue, 31 Jul 2018 13:26:16 GMT

Thank you for your help. But I'm unable to use an RTOS and MCUXpresso does not support my board.

Re: Setting up CW 11 for specific dev board?

ZhangJennie — Wed, 01 Aug 2018 08:28:23 GMT

Yes, MCUXpresso doesn't support codefire.

you use Coldfire M54451EVB , you need use CodWarrior. I just checked MQX doesn't support his board.

As I know we do not have any plan for MQX to support M54451EVB.(Only the M54455EVB are supported in MQX4.x.)

Have a great day,
Jennie Zhang

Re: Setting up CW 11 for specific dev board?

zwilcox — Wed, 01 Aug 2018 15:32:04 GMT

Right. I am using ColdWarrior. And have no plans to use MXQ.

Re: Setting up CW 11 for specific dev board?

ZhangJennie — Thu, 02 Aug 2018 07:09:36 GMT

If don't use MQX, we can only choose "derivative" only.