topic symbols not working in CodeWarrior for MCU

symbols not working

Mike_d — Fri, 21 Sep 2018 18:24:56 GMT

CodeWarrior 10.7, Target is 56F8345 DSC

Re: symbols not working

ZhangJennie — Wed, 26 Sep 2018 09:58:55 GMT

HI Mike,

To work on your problem, please provide me more information:

1. send me your demo project,

2. you debug project in simulation mode or connecting board?

Thanks.

Have a great day,
TIC

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: symbols not working

Mike_d — Wed, 26 Sep 2018 14:11:33 GMT

Hi,

Attached is a sample project. No board needed just compile. This was not a problem until I installed the DSC support to CodeWarrior 10.7. Before I only had Kinetis support and it worked fine.

Regards,

-Mike

Re: symbols not working

ZhangJennie — Sun, 30 Sep 2018 01:48:38 GMT

Hi,

I add DEBUG to "#Symbols" tab, then build your project, there is no error from my side. See attached video.

Have a great day,
TIC

Re: symbols not working

Mike_d — Mon, 01 Oct 2018 17:12:02 GMT

Hi,

Can you share your version information? I re-installed CW with same original results.

Thanks,

-Mike

Re: symbols not working

ZhangJennie — Mon, 08 Oct 2018 02:34:28 GMT

Hi Mike,

I use CW11.

Have a great day,
TIC