CodeWarrior for MCU中的主题 Re: CodeWarrior didn't generator S19 when define a MACRO in file or project properties.

CodeWarrior didn't generator S19 when define a MACRO in file or project properties.

w_tension — Tue, 27 Mar 2018 01:24:07 GMT

I'd like to make a two branch project. So I try to use preprocessor macros.

Pictures below are an example:

----------- Before I set.

------ Define a 'USE_WATCHDOG'

----------- main.c show a key icon on it.

---------- Then my project just generate abs binary file.The S19 missing.

Re: CodeWarrior didn't generator S19 when define a MACRO in file or project properties.

BlackNight — Tue, 27 Mar 2018 03:07:41 GMT

I think this could be the same issue as described in Traps and Pitfalls: No Hex/Bin/S19 File Created with GNU? | MCU on Eclipse . Can you check the generated make files if this is indeed that problem?

I hope this helps,

Erich

Re: CodeWarrior didn't generator S19 when define a MACRO in file or project properties.

w_tension — Tue, 27 Mar 2018 03:39:26 GMT

Seems close but not quite the same.

I can debug with the *.abs file.

I'm using S08 mcu, so the tool chain isn't the same.

Makefile has the same problem.

# Add inputs and outputs from these tool invocations to the build variables
EXECUTABLES += \
EXECUTABLES_QUOTED += \
EXECUTABLES_OS_FORMAT += \
BURNER_OUTPUT_OUTPUTS += \
BURNER_OUTPUT_OUTPUTS_QUOTED += \
BURNER_OUTPUT_OUTPUTS_OS_FORMAT += \

Re: CodeWarrior didn't generator S19 when define a MACRO in file or project properties.

Alice_Yang — Wed, 30 May 2018 10:10:54 GMT

Hello Tension,

Have your problme resolved ?

If no, please tell us the CW version and it's better share your project .

Alice

Re: CodeWarrior didn't generator S19 when define a MACRO in file or project properties.

BlackNight — Wed, 30 May 2018 12:50:24 GMT

I really think it is the same problem as described in Traps and Pitfalls: No Hex/Bin/S19 File Created with GNU? | MCU on Eclipse : the issues is caused by a 'option per file' usage, as indicated by the 'pin' on your main.c.

And this is an Eclipse problem, not a toolchain problem.

I hope this helps,

Erich

Re: CodeWarrior didn't generator S19 when define a MACRO in file or project properties.

w_tension — Tue, 05 Jun 2018 06:22:41 GMT

Not solved. I agree that it's a Eclipse issue.

I'm using CodeWarrior for MCU V11.0.