CodeWarrior for MCUのトピックRe: Missing file MBit1.hI

Missing file MBit1.hI

juliancox — Mon, 08 May 2017 11:43:32 GMT

I cannot implement BItIO or BItsIO. I used Processor Expert to configure my on-chip components, but when I build the project it fails with the message: -

mingw32-make: *** No rule to make target `XXX/Generated_Code/MBit1.h', needed by `Sources/Events_c.obj'. Stop.

(file name and path left out for copyright purposes)

I find that file MBit1.h does not exist on my computer. Other components (ByteIO, FreeCntr) work fine

work fine.

I am using Version 10.7

Re: Missing file MBit1.hI

Carlos_Mendoza — Mon, 08 May 2017 15:29:59 GMT

Hi Julian,

Could you tell us which MCU are you using?

Thanks in advance!

Best Regards,
Carlos Mendoza
Technical Support Engineer

Re: Missing file MBit1.hI

juliancox — Mon, 08 May 2017 15:45:38 GMT

Hi Carlos,

I am using a MC9S08QE128on a DEMOQE board. However, since posting this question a very strange thing happened. I decided that, while waiting for a solution to my problem, I would carry on writing my application code. Using Processor Expert, I added a counter (FC1) and both BitIO and BitsIO and it compiled without error, BUT having checked everything there is no #include "MBit1.h" anywhere in the project, especially Events.c.

Re: Missing file MBit1.hI

Carlos_Mendoza — Tue, 09 May 2017 21:30:43 GMT

Hi Julian,

It is good to hear the problem has been fixed, please let us know if the issue come up again.

Best Regards!
Carlos Mendoza
Technical Support Engineer