CodeWarrior for MCU中的主题 Re: 68HC11 Monitor Program to work with CodeWarrior Source Level Debugger https://community.nxp.com/t5/CodeWarrior-for-MCU/68HC11-Monitor-Program-to-work-with-CodeWarrior-Source-Level/m-p/133075#M1367 <HTML><HEAD></HEAD><BODY><DIV>Hello</DIV><DIV>&nbsp;</DIV><DIV>Originally we tested CodeWarrior for HC11 on following Freescale evaluation boards:</DIV><DIV>&nbsp;&nbsp;&nbsp;&nbsp;M68HC11EVS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</DIV><DIV>&nbsp;&nbsp;&nbsp;M68HC11EVM&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<BR />&nbsp;&nbsp;&nbsp;M68HC11EVB&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<BR />&nbsp;&nbsp;&nbsp;M68HC11EVBU2&nbsp;&nbsp;<BR /></DIV><DIV>I have no clue which one of these boards are still available for purchase.</DIV><DIV>&nbsp;</DIV><DIV>Source code for ROM monitor are delivered with CodeWarrior for HC11. Look at directory {Install}\Monitor\HC11c.</DIV><DIV>Also if you are using your own board, look at {Install}\docu\HC11\manual\Manual Small Monitor HC11.pdf.</DIV><DIV>Section "Porting the Monitor Program to your Own Hardware" provides info on how to achieve that.</DIV><DIV>&nbsp;</DIV><DIV>I hope that helps a little bit.</DIV><DIV>&nbsp;</DIV><DIV>CrasyCat</DIV></BODY></HTML> Fri, 13 Oct 2006 18:44:01 GMT CrasyCat 2006-10-13T18:44:01Z 68HC11 Monitor Program to work with CodeWarrior Source Level Debugger https://community.nxp.com/t5/CodeWarrior-for-MCU/68HC11-Monitor-Program-to-work-with-CodeWarrior-Source-Level/m-p/133074#M1366 <HTML><HEAD></HEAD><BODY><DIV>I am a new&nbsp;user of&nbsp;CodeWarrior IDE platform. Here are my questions</DIV><DIV>&nbsp;</DIV><DIV><DIV>[1] Which 68HC11 EVM or EVB would you recommend for me to practice with CodeWarrior source level&nbsp;debugger. The cheapest option is better and how much you think it will cost?</DIV><DIV>&nbsp;</DIV></DIV><DIV>[2] Where can I find a 68HC11 monitor program to work with CodeWarrior source level debugger?</DIV><DIV>&nbsp;</DIV><DIV>Thanks in advance.</DIV><DIV>&nbsp;</DIV></BODY></HTML> Fri, 13 Oct 2006 10:18:23 GMT https://community.nxp.com/t5/CodeWarrior-for-MCU/68HC11-Monitor-Program-to-work-with-CodeWarrior-Source-Level/m-p/133074#M1366 HK168 2006-10-13T10:18:23Z Re: 68HC11 Monitor Program to work with CodeWarrior Source Level Debugger https://community.nxp.com/t5/CodeWarrior-for-MCU/68HC11-Monitor-Program-to-work-with-CodeWarrior-Source-Level/m-p/133075#M1367 <HTML><HEAD></HEAD><BODY><DIV>Hello</DIV><DIV>&nbsp;</DIV><DIV>Originally we tested CodeWarrior for HC11 on following Freescale evaluation boards:</DIV><DIV>&nbsp;&nbsp;&nbsp;&nbsp;M68HC11EVS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</DIV><DIV>&nbsp;&nbsp;&nbsp;M68HC11EVM&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<BR />&nbsp;&nbsp;&nbsp;M68HC11EVB&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<BR />&nbsp;&nbsp;&nbsp;M68HC11EVBU2&nbsp;&nbsp;<BR /></DIV><DIV>I have no clue which one of these boards are still available for purchase.</DIV><DIV>&nbsp;</DIV><DIV>Source code for ROM monitor are delivered with CodeWarrior for HC11. Look at directory {Install}\Monitor\HC11c.</DIV><DIV>Also if you are using your own board, look at {Install}\docu\HC11\manual\Manual Small Monitor HC11.pdf.</DIV><DIV>Section "Porting the Monitor Program to your Own Hardware" provides info on how to achieve that.</DIV><DIV>&nbsp;</DIV><DIV>I hope that helps a little bit.</DIV><DIV>&nbsp;</DIV><DIV>CrasyCat</DIV></BODY></HTML> Fri, 13 Oct 2006 18:44:01 GMT https://community.nxp.com/t5/CodeWarrior-for-MCU/68HC11-Monitor-Program-to-work-with-CodeWarrior-Source-Level/m-p/133075#M1367 CrasyCat 2006-10-13T18:44:01Z