Re:encryption

guochunhua — Mon, 15 Aug 2016 00:46:03 GMT

您好！

我不能连接上，你们发给我的链接地址，请你们直接把CAN'的例子程序发给我。我的程序现在就剩下CAN的程序了，没有CAN的程序，不能上车做实验。

If you would like to use FlexCAN component , please first get its license.

http://tinyurl.com/zp3ltgj

! I also attached two example projects for FlexCAN which are not based on PE.

祝好！

At 2016-06-27 16:11:51, "guochunhua" <gch58@163.com> wrote:

Dear sir

I want to encrypt the MCU of 56f84789 in PE of codewarrior 10.4, if 56f84789 is locked and I want to reload program to it, what can I do? how can I encrypt and decrypt 56f84789 in PE of codewarrior 10.4? thank you very much.

Best regards.

guo chunhua

Re:encryption

TICS_Fiona — Tue, 16 Aug 2016 07:18:07 GMT

Hello Chunhua

I attached an example project for 56F84789 FlexCAN module, which is based on Processor Expert.

For the project without PE, you can find it in:

https://community.nxp.com/message/651115#comment-651115

Best Regards

Fiona Kuang

TIC - Technical Information Center

-----------------------------------------------------------------------------------------------------------------------

Note: If this post answers your question, please click the Mark Correct button. Thank you!

-----------------------------------------------------------------------------------------------------------------------

topic Re:encryption in CodeWarrior for MCU

Re:encryption

Re:encryption