topic Re: Cannot debug with FRDM-K22F and USBDM in CodeWarrior for MCU

Cannot debug with FRDM-K22F and USBDM

abdullahkahrama — Tue, 28 Jun 2016 09:31:59 GMT

Hello,

I want to debug on board K22 microcontroller on my FRDM-K22F board using CodeWarrior, however I am having this error:

My debug configuration for CodeWarrior is as follows. I cannot change "Erase Options". No matter what I select, the next time I open the dialog, it resets back to "Block erase entire device".

I have a new FRDM-K22F board and I have programmed it with USBDM using "OpenSDAv2_1_Unique_ID.bin" file under the folder "../pgo/USBDM 4.12.1.100/FlashImages/MKxx".

The board is listed fine in the Device Manager, as it can be seen in below screenshot:

Codewarrior also shows that the USBDM plugins are installed:

I can also, with no errors, detect, program and verify the chip using "ARM Programmer" tool of USBDM:

What could possible be my problem? Why I cannot debug it using CodeWarrior?

Re: Cannot debug with FRDM-K22F and USBDM

Alice_Yang — Wed, 29 Jun 2016 02:34:15 GMT

Hello ,

As i know , the chip of FRDM-F22 board is MK22FN512VLH12 MCU,

while the CWv10.6 doesn't support this chip .

You can use the KDS v3.2 to develop this chip .

Please refer to this thread to download and install :

New Kinetis Design Studio v3.2.0 available

Hope it helps

Have a great day,
Alice

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: Cannot debug with FRDM-K22F and USBDM

abdullahkahrama — Thu, 30 Jun 2016 06:20:46 GMT

Oh, silly me. You are right.

Thank you very much for this help.. :smileyhappy:

Re: Cannot debug with FRDM-K22F and USBDM

Alice_Yang — Thu, 30 Jun 2016 09:32:00 GMT

Hi Abdullah,

Welcome !

Alice