Porting a project from Freescale to GCC

kirantujare — Fri, 26 Aug 2016 04:09:34 GMT

I want to port my project from Freescale compiler to gcc compiler. I haven used the following pdf. I did not understand number 7 in the pdf I also cannot find the file kinetis_sysinit.c in the new project folder.

Re: Porting a project from Freescale to GCC

TICS_Fiona — Fri, 26 Aug 2016 10:40:17 GMT

Hello Kiran

For a CodeWarrior project based on Freescale Build Tools without Processor Expert included, "kinetis_sysinit.c" locates under <\Startup_Code> folder. This file sets the Interrupt vector table.

If your project is created with Processor Expert, you can find the vector table in "Vectors_Config.h" which is included in "Vectors.c".

Best Regards

Fiona Kuang

TIC - Technical Information Center

-----------------------------------------------------------------------------------------------------------------------

Note: If this post answers your question, please click the Mark Correct button. Thank you!

-----------------------------------------------------------------------------------------------------------------------

topic Re: Porting a project from Freescale to GCC in CodeWarrior for MCU

Porting a project from Freescale to GCC

Re: Porting a project from Freescale to GCC