CodeWarrior for MCUのトピックHC12: Best way to declair periperails

HC12: Best way to declair periperails

NZ_Design — Thu, 05 Oct 2006 10:32:15 GMT

I have external ram decleared as so

BatteryRAM = NO_INIT 0x200000'G TO 0x3FFFFF'G; // CS1

Bat_RAM INTO BatteryRAM;

#pragma DATA_SEG __GPAGE_SEG Bat_RAM
char cExt_RAM[56];
#pragma DATA_SEG DEFAULT

do I do somethings simalar for a peripheral or is there a better way.

Daniel

Message Edited by CrasyCat on 2007-04-13 01:47 PM

Re: Best way to declair periperails

Alban — Thu, 05 Oct 2006 16:50:58 GMT

Hi Daniel,

Your method is very suitable and will allow you to re-use your peripherals easily on other devices.

The only thing I would change is not to declare one ARRAY but instead create an union so it's easy for you to access within your code: you can call via bit or byte with the register name instead of a name and same index.

See some exmple below of what I use:

Code:

typedef union uCOPCTL{             tU08 byte;   struct    {      tU08 cr     :3;      /*cop timer rate select */      tU08 coprstp:1;      /*cop runs in stop mode */      tU08 copswai:1;      /*cop stops in wait mode */      tU08 wrtmask:1;      /*Write Mask for WCOP and CR[2:0] Bit */      tU08 rsbck  :1;      /*cop stops in active bdm */      tU08 wcop   :1;      /*window cop enable */    }bit;}tCOPCTL;#define CR0     0x01  /*bit masks */#define CR1     0x02#define CR2     0x04#define COPRSTP 0x08#define COPSWAI 0x10#define WRTMASK 0x20#define RSBCK   0x40#define WCOP    0x80typedef struct           {  volatile tCOPCTL  ctl;      /* COP control register */  volatile tU08     armcop;   /* COP timer arm/reset register */}tCOP;

and declare it in a periph.h

Code:

extern volatile tCOP     COP      @0x003E;    /* COP */

Cheers,

Alban.

Re: Best way to declair periperails

NZ_Design — Fri, 06 Oct 2006 02:36:45 GMT

Sorry but dont understand.

You have setup a structure to access indervidual buts within a internal register.

I are wonting to address a external device memory mapped to CS0 on the MC9S12xDP512 processor.

ie at address 400000 and another device at 400002 etc

Daniel