topic Re: usbdm et code warrior in CodeWarrior for MCU

usbdm et code warrior

bourineauthierr — Sat, 05 Dec 2015 14:05:16 GMT

bonjour

j'ai fabriqué un programmateur usbdm

et installé usbdm version: 4.12.1.40

CodeWarrior for MCU

Version: 10.6

Build Id:140329

impossible de voir le device sous code warrior :

choix usbdm non présent lors de la création d'un nouveau projet.

merci de votre aide

Re: usbdm et code warrior

TICS_Fiona — Tue, 08 Dec 2015 08:38:27 GMT

Hello Thierry

What is the part number of your MCU?

Best Regards

Fiona Kuang

Technical Information & Commercial Support

Re: usbdm et code warrior

bourineauthierr — Tue, 08 Dec 2015 10:04:16 GMT

Hi,

The part as target is s9s08QD4

The part usbdm is s9s08js16CWJ

I checked each connection of the PCB ..I

Code warrior is a special edition.

I will deinstall and reinstall code warrior and to check again

Thank

Re: usbdm et code warrior

pgo — Tue, 05 Jan 2016 00:14:21 GMT

Hi Thierry,

Could I check:

Did you install USBDM after Codewarrior?
Is Codewarrior detected by the installer (it should appear selected)?
Does USBDM appear in the about Codewarrior dialogue?

If you click on the icon it should produce more information:

I confirmed that I was able to create a project for the MC9S08QD4 device with a USBDM launch configuration.

It is necessary to install USBDM after Codewarrior (and possibly re-install after a major update) as USBDM modifies the Codewarrior installation.

bye