topic Re: Integration Library "Automotive Math and Motor Control Library Set for KEAx devices" in CodeWarrior for MCU

Integration Library "Automotive Math and Motor Control Library Set for KEAx devices"

kuanyuenliao — Wed, 04 Nov 2015 05:40:05 GMT

Hello,

I am building a motor control project by CodeWarrior ver. 10.6, follow the guide "Automotive Math and Motor Control Library Set for KEAx devices User's Guide", and work on "3.10 Library Integration into a Freescale CodeWarrior Eclipse IDE"‧

Then I have the problem:

1) The environment is different between the guide figure and CW IDE, so I cannot sure if I have done the library linking or not.

2) After built, I got the error message:

Description	Resource	Path	Location	Type
cannot find -lD:FreescaleAMMCLIBKEAx_AMMCLIB_v1.1.2libcw10xKEAx_AMMCLIB.UC.a	aaaa			C/C++ Problem

Besides the slash，it's the right address.

thanks!

Re: Integration Library "Automotive Math and Motor Control Library Set for KEAx devices"

TICS_Fiona — Thu, 05 Nov 2015 09:46:41 GMT

Hello KuanYuen

Please open the Project Properties, remove your old setting for ‘Libraries’ in ‘Paths and Symbols’, add the library instead in the <ARM Ltd Windows GCC C liner -> Miscellaneous -> other objects>, please see the screenshot in below:

Does it work?

Fiona Kuang

Technical Information & Commercial Support

-----------------------------------------------------------------------------------------------------------------------

Note: If this post answers your question, please click the Correct Answer button. Thank you!

-----------------------------------------------------------------------------------------------------------------------