CodeWarrior for MCUのトピックPossible to use BDM through USB redirection? https://community.nxp.com/t5/CodeWarrior-for-MCU/Possible-to-use-BDM-through-USB-redirection/m-p/445497#M12005 <HTML><HEAD></HEAD><BODY><P>Has anyone had any luck using a BDM through USB port redirection connected to Code Warrior debugger running on a remote machine?</P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P>I need to work at a remote site and cannot transfer my CodeWarrior license to the laptop.</P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P>When I am at the remote site with the laptop, I log into my desktop development machine using Remote Desktop and use Code Warrior that way. I plug my BDM into the laptop then redirect the laptop USB port back to the desktop development machine using RemoteFX (part of Remote Desktop). The BDM appears as a local device back on the development desktop.</P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P>CodeWarrior debugger sees the BDM except it struggles to communicate. It cannot determine a valid IO_DELAY_CNT, etc. Perhaps the latency of the USB redirection through the Ethernet is causing the issue.</P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P>Does anyone have any experience doing this?</P></BODY></HTML> Mon, 17 Aug 2015 15:42:04 GMT jgirard1 2015-08-17T15:42:04Z Possible to use BDM through USB redirection? https://community.nxp.com/t5/CodeWarrior-for-MCU/Possible-to-use-BDM-through-USB-redirection/m-p/445497#M12005 <HTML><HEAD></HEAD><BODY><P>Has anyone had any luck using a BDM through USB port redirection connected to Code Warrior debugger running on a remote machine?</P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P>I need to work at a remote site and cannot transfer my CodeWarrior license to the laptop.</P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P>When I am at the remote site with the laptop, I log into my desktop development machine using Remote Desktop and use Code Warrior that way. I plug my BDM into the laptop then redirect the laptop USB port back to the desktop development machine using RemoteFX (part of Remote Desktop). The BDM appears as a local device back on the development desktop.</P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P>CodeWarrior debugger sees the BDM except it struggles to communicate. It cannot determine a valid IO_DELAY_CNT, etc. Perhaps the latency of the USB redirection through the Ethernet is causing the issue.</P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P>Does anyone have any experience doing this?</P></BODY></HTML> Mon, 17 Aug 2015 15:42:04 GMT https://community.nxp.com/t5/CodeWarrior-for-MCU/Possible-to-use-BDM-through-USB-redirection/m-p/445497#M12005 jgirard1 2015-08-17T15:42:04Z