topic Re: CodeWarrior 6.3 import error . in CodeWarrior for MCU

CodeWarrior 6.3 import error .

forastero — Mon, 25 Aug 2014 20:15:44 GMT

When I tried to import a CodeWarrior 6.3 project into a CodeWarrior 10.6 IDE, the "This toolchain is not supported for this target." error appear.

Re: CodeWarrior 6.3 import error .

TICS_Fiona — Tue, 26 Aug 2014 02:01:11 GMT

The Classic Project Importer in CodeWarrior 10.6 only supports DSC family.

For other products, the solution is to create a new bareboard project in CW10.6 and then add/copy all your source files to the new project. Below is an application not for how to do this:

http://cache.freescale.com/files/soft_dev_tools/doc/app_note/AN4727.pdf

Best Regards

Fiona

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: CodeWarrior 6.3 import error .

forastero — Tue, 26 Aug 2014 11:21:27 GMT

Thanks TICS_Fiona . I'm very sad about this :smileycry:.

Re: CodeWarrior 6.3 import error .

stanish — Tue, 26 Aug 2014 12:44:01 GMT

Hello forastero,

You can give a try and install CodeWarrior for MCUs v10.2 which includes CFv1/HCs08 project importer.

CodeWarrior for MCUs (Eclipse IDE) - ColdFire|Freescale

But migrated project might not work as expected since the importer has some issues to migrate a complex project.

Hope it helps.

Stan

Re: CodeWarrior 6.3 import error .

forastero — Wed, 27 Aug 2014 12:58:21 GMT

Thanks You stanislavadamek . I installed CodeWarrior 10.2 and inported a very simple project and work fine.

But when I tried to import a project with few files, it doesnt work.

I found https://community.freescale.com/community/the-embedded-beat/blog/2012/04/05/codewarrior-tip-6-there-ought-to-be-a-rule

But:

It doesnt work.

And the "path variables" is fine:

"Linked Resources" is fine

because the path is correct

Can you help me?:smileyconfused: