topic Re: HC08: Error 18 while burning the firmware in CodeWarrior for MCU

HC08: Error 18 while burning the firmware

Sany — Sat, 23 Sep 2006 06:25:06 GMT

Hi all, I keep getting "Error 18 during script" when I try to burn my firmware into my HCS08AW60 MCU. I need to repeat the burning process for like 20 to 30 times before it successfully to burn the MCU. I not sure whether this is my own PC problem or my BDM problem. I try this BDM Multilink Interface on other PC before it work well. So I believe it is my pc problem but which part of my pc that cause that Error? The USB port? I noticed that, if I keep the BDM Multilink (USB) connecting my pc while i restart my PC, my PC will hang. Anyone can help? Thank you for spending time reading.

Message Edited by CrasyCat on 2007-04-13 01:59 PM

Re: HC08: Error 18 while burning the firmware

vinze — Tue, 10 Jun 2008 20:53:04 GMT

Hi everybody,

I have the same problem than Sany (with MC9S08QE128). Has anyone found the solution since 2007-04-13 ?

Thanks.

Re: HC08: Error 18 while burning the firmware

peg — Wed, 11 Jun 2008 05:28:33 GMT

Hi vinze,

Given that the description of this error is simply "Error during programming" which is quite unhelpful, I would suggest you post this question direct to P&E themselves here.

Re: HC08: Error 18 while burning the firmware

vinze — Tue, 17 Jun 2008 19:58:41 GMT

ok, the problem was the multilink, it wasn't up-to-date. But I don't know why it worked fully on one computeur, and on the other it was able to erase, to read, but not to program...

thank you

bye.